The two new VHP Filters VHP-500 (0,5 μm) and VHP-505 (0,2 μm) are available for UHPLC applications, where filtering particulates from the system is extremely important to prolonging the life of sub-2 μm particle columns. Place the Inline VHP Filter between the pump and injection valve to prolong the life of the injection valve rotor seal by removing any particulates generated by wear of the pump seal. The small volume of the Inline Filter minimizes the introduction of dispersion in the system.
The unique Precolumn VHP Filter offers additional column protection and is designed to connect directly into the 10-32 coned port of your column or other piece of hardware. Incorporating an adjusting tube, the VHP Precolumn Filter adjusts to most commonly-found port depths, thus helping to eliminate the possibility of dead volume. The Precolumn Filter can be reused in multiple ports and a good connection is ensured every time. The replacement product for the Precolumn Filter is easy to use and includes a fresh piece of stainless steel tubing, which extends the lifetime of the assembly.
- Inline and precolumn configurations available
- Pressure rated to 15.000 psi (1.035 bar)
- Low internal volume