You have no items in your shopping cart.

2% online discount, easy
payment by credit card
Fast delivery, reduced
costs from 150 €
More than
100k products

 Syringe Filters

We offer a large number of syringe filters by various manufacturers. Syringe filters by Altmann Analytik are the great low cost alternative to the leading syringe filter brands that we carry. We stock Whatman Filters, Millipore Filters, Sartorius Filters, Thermo Fisher Scientific Filters, Pall Filters and many more. Use the drop down menu to filter for the pore size you need (from 0,1µm to 5µm), the filter diamter (from 3mm to 50mm) and all available membrane materials (GF, CA, PP, PES, CN, GD, GHP, PTFE, PVDF, RC)


Product was successfully added to your shopping cart.

Syringe Filters

Set Ascending Direction

Set Ascending Direction

Selection of the right syringe filter

To find the right syringe filter for your application, do the following:

1. Determine the filter size:

     3 mm: for sample volumes <1 ml
     15 mm: for sample volumes 1 - 10 ml
     25 mm: for sample volumes> 10 ml

2. Determine the pore size:

     0.20 μm: recommended for UHPLC and HPLC columns with pore sizes <3 μm
     0.45 μm: recommended for HPLC columns with pore sizes <3.5 μm

3. Do you need a fiberglass membrane?

If so, choose a filter with glass fiber (GF) membrane, e.g. GF / PTFE.

4. Select the appropriate membrane

Further information on the properties and application areas of the membranes can be found in the table below.

Properties of Syringe Filters

The properties of syringe filters made from different materials are extremely verifying. Therefore, the choice of the filter especially depends on the chemicals used for synthesis. 
The following table provides an overview of the most common materials for syringe filters combined with the acronyms, the application areas as well as the chemical resistance of each synthetic.

Specific Properties     Application Areas
Cellulose Acetate (CA)   Low protein absorbtion, especially suited for steril filtration and clarification of aqueous solutions, culture media, buffers and serums. Good chemical resistance versus alcoholics and oils with a pH range from 4 to 8. This hydrophilic membrane is characterized by excellent flow trough and extraordinary temperature stability up to 180° C.
Cellulose Nitrate (CN)   Cellulose nitrate membranes are standard membranes for analytical and microbiological membrane filtration. These filters are available in many different pore sizes to cover various application areas like water, food or drink analysis. Chemical resistance versus aqueous solutions with a pH from 4 to 8, carbon hydrates or organic solvents is guaranteed up 130° C.
Polyamide (PA)   Hydrophilic membranes that can be used several times for filtration of aqueous or organic solvents and aqueous solutions with a pH ranging from 3 to 14. Especially suited for steril filtration and clarification due to low amount of extractables.
Polycarbonate (PC)   Membranes made from polycarbonate are characterized by a uniform, round pore structure for the whole membrane. Particles can be identified easily due to the high contrast to the smooth surface. 
Polytetrafluoroethylene (PTFE)   Permanently hydrophobic filter material, perfectly applicable for air and gas as well as non-polar liquids. PTFE membranes are characterized by an extraordinary chemical resistance versus nearly all chemicals and are suited for both filtration of acids or aggressive solvents and particle filtration of air or water samples up to 200° C.
Regenerated Cellulose (RC)   Regenerated cellulose membranes are solvent resistent and hydrophilic. 0.45 µm pore sizes are mainly used for HPLC sample preparation. This membrane type is resistent versus most solvents, as well as aqueous solutions with a pH from 3 to 12 and temperature stable up to 200° C.


Pore Sizes ans Pore Volumes

The filter size especially depends on the filtration volume. For small volumes (< 1 ml) syringe filters with a diameter of 3 mm are usually, for medium volumes (1-10 ml) 15 mm and for large volumes (> 10 ml) 25 mm. Common pore sizes for UHPLC and HPLC columns with small particle sizes (< 3 µm) are 0.2 and for columns with larger particle sizes (> 3.5 µm) 0.45 µm, respectively. The pore sizes available range from sub µm up to 10 µm.


Syringe Filters - Sartorius, Pall, Merck

Information about the specific properties of each manufacturer for selected syringe filters (filter medium, diameter) can be found at Whatman syringe filter, Sartorius syringe filter, Pall Acrodisc syringe filter and Merck Millipore syringe filter.
The following specifications are be combined:

  • Pore size: 0.1 µm - 10.0 µm
  • Filter diameter: 3.0 mm - 50.0 mm
  • Material: CA, CN, GF, PA, PES, PTFE, PVDF, RC