Adapter, Medium/Low Pressure HPLC, PEEK, Waters female to Waters male, 0.4 mm Bore, Min Order 11 pieces

These PEEK adapters are suitable for application in both medium and low pressure range.
The "flat" section on the knurled adapter allows to use a wrench for an extra 1/8 of clockwise turn for tighter sealing or a slight counterclockwise turn to help remove if a tight fitting is too hard for hand removal. The flat section can also be used to hold the adapter in place with a wrench while the male nut is tightened in the adapter.

Old ARE Number : ARE53.1.0757.04