You have no items in your shopping cart.

2% online discount,
easy payment
Reduced delivery costs
from $250
More than
50k products

Syringe Filters

We offer a large number of syringe filters by various manufacturers. Syringe filters by Altmann Analytik are a great low cost alternative to the leading syringe filter brands that we carry. Use the drop down menu to choose the pore size you need (from 0.1 µm to 5 µm), the filter diameter (from 3 mm to 50 mm) and all available membrane materials (GF, CA, PP, PES, CN, GD, GHP, PTFE, PVDF, RC). If you need help finding the right filters for you application, please feel free to contact us.

Product was successfully added to your shopping cart.

Syringe Filters

Set Ascending Direction

Set Ascending Direction

Properties of Syringe Filters

The properties of syringe filters made from different materials are extremely verifying. Therefore, the choice of the filter especially depends on the chemicals used for synthesis.

The following table provides an overview of the most common materials for syringe filters combined with the acronyms, the application areas as well as the chemical resistance of each synthetic.

Specific Properties Application Areas
Cellulose Acetate (CA) Low protein absorbtion, especially suited for steril filtration and clarification of aqueous solutions, culture media, buffers and serums. Good chemical resistance versus alcoholics and oils with a pH range from 4 to 8. This hydrophilic membrane is characterized by excellent flow trough and extraordinary temperature stability up to 180° C.
Cellulose Nitrate (CN) Cellulose nitrate membranes are standard membranes for analytical and microbiological membrane filtration. These filters are available in many different pore sizes to cover various application areas like water, food or drink analysis. Chemical resistance versus aqueous solutions with a pH from 4 to 8, carbon hydrates or organic solvents is guaranteed up 130° C.
Polyamide (PA) Hydrophilic membranes that can be used several times for filtration of aqueous or organic solvents and aqueous solutions with a pH ranging from 3 to 14. Especially suited for steril filtration and clarification due to low amount of extractables.
Polycarbonate (PC) Membranes made from polycarbonate are characterized by a uniform, round pore structure for the whole membrane. Particles can be identified easily due to the high contrast to the smooth surface.
Polytetrafluoroethylene (PTFE) Permanently hydrophobic filter material, perfectly applicable for air and gas as well as non-polar liquids. PTFE membranes are characterized by an extraordinary chemical resistance versus nearly all chemicals and are suited for both filtration of acids or aggressive solvents and particle filtration of air or water samples up to 200° C.
Regenerated Cellulose (RC) Regenerated cellulose membranes are solvent resistent and hydrophilic. 0.45 µm pore sizes are mainly used for HPLC sample preparation. This membrane type is resistent versus most solvents, as well as aqueous solutions with a pH from 3 to 12 and temperature stable up to 200° C.

Pore Sizes and Volumes

The filter size especially depends on the filtration volume. For small volumes (< 1 ml) syringe filters with a diameter of 3 mm are being used, for medium volumes (1-10 ml) 15 mm and for large volumes (> 10 ml) 25 mm. Common pore sizes for UHPLC and HPLC columns with small particle sizes (< 3 µm) are 0.2 and for columns with larger particle sizes (> 3.5 µm) 0.45 µm, respectively. The pore sizes available range from sub µm up to 10 µm.The following tables give an overview about the different filter types and the specific lables of each producer.

Syringe Filter Comparison Chart

Material Whatman Sartorius Pall Millipore
CA Puradisc CA Minisart NML
GF Whatman GD/X Minisart GF Acrodisc GF
PA Puradisc PA Minisart NY Acrodisc PA Millex
PES Puradisc PES Minisart PES Acrodisc PES Millipore Express
PTFE Puradisc PTFE Minisart SRP Acrodisc PTFE Millipore LCR
PVDF Puradisc PVDF Acrodisc PVDF Durapore
RC Whatman Spartan Minisart RC