DURAN® replacement silicone gasket for the GL 45 stainless steel connection cap, USP Class VI VMQ silicone, 40.5 x 3 mm with 28 mm inner diamater opening, 10 pc/PAK

DURAN® Replacement Silicone Sealing Gasket (40.5mm; OD 27.5 mm, ID 3 mm), USP Class VI A robust and resistant hose connection system for DURAN® GL 45 laboratory and media bottles of many sizes. The bottle cap adapter simplifies the transfer of liquids within closed and sterile systems. The push-in fittings on the inside and outside of the cap are suitable for connecting flexible tubing with an internal diameter of 8.0 mm. The freely rotating stainless steel middle piece allows the bottle to be opened without having to disconnect the tube connections. Connections and middle piece are made of stainless steel type 316L (1.4404/S31603). The silicone seal and the red GL 45 screw cap made of PBT ensure a liquid-tight seal. Wide temperature application range (up to 180 °C). Autoclavable (at 121 °C/15 minutes). With Retrace Code. Features and Benefits: Easier attachment of hoses by means of bevelled, upper plug-in olives The one, two or three plug-in olives on the inside and outside of the closure are suitable for connecting flexible hoses with an internal diameter of 8.0 mm, e.g. Sani-Tech® Ultra (ULTRA-C-312) silicone tubes The freely rotating stainless steel middle piece allows the bottle to be opened without disconnecting the tube connections Simplified transfer of liquids within closed and sterile systems through the bottle cap adapter All parts are completely welded, to prevent inclusions and cavities Hygienic, electropolished surface for efficient cleaning and sterilization A USP Class VI silicone gasket and the red PBT GL 45 screw cap provide a liquid tight seal Lot coded for tracability Application: A reusable connector GL 45 cap with two ports for connecting tubing., Sterile fluid transfer in and out of lab bottles, Supply of reagents to instruments, Port assemblies for spinner flasks, and cell culture vessels, Autoclaving of media in bottles