PC3 and SSI cyclonic/scott dual spray CH

This PC3 Peltier cooled inlet system, which includes a quartz SSI Cyclonic/Scott dual spray chamber, quartz injector, and PFA-ST nebulizer, is used with NexION®® 300 and 350 ICP-MS series instruments. The PC3 has two preset temperatures +2 °C / -5 °C and is ideal for analysis of aqueous or aqueous/organic mixtures.

The PC3 is a small, robust Peltier cooled cyclonic spray chamber. The PC3 offers the advantages of low memory effects, constant temperature, fast rinse-out, and high sample transport efficiency. The cooled outer walls of the PC3 spray chamber enhance long-term signal stability, reduce polyatomic interferences such as oxides, and reduce solvent loading when volatile organic solvents are analyzed. The Stable Sample Introduction (SSI) spray chamber is an all-quartz, O-ring-free spray chamber with an additional mixing chamber to homogenize sample aerosol prior to introduction to the ICP-MS. The SSI chamber improves short-term stability for isotope ratio measurements. The spray chamber may be combined with PC3 to enhance long-term stability. The SSI or PC3-SSI not only improves isotope ratio precision, but is useful for any analysis where better short- and/or long-term signal stability is desired. Benefits of SSI Improves signal stability roughly 2x to 3x Improves isotope ratio precision up to 5x Reduces cone deposition Virtually eliminates the possibility of a flooded torch and the resulting instrument damage Benefits of SSI with PC3 Constant temperature improves long-term stability Reduces oxides and polyatomic interferences No separate chiller required Very low maintenance The sample introduction kit includes: PC3-SSI Peltier Cooler and Power Supply Quartz SSI Cyclonic/Scott Dual Spray Chamber (N8145313) Spray Chamber-Injector Connection PFA-ST Nebulizer 1.5 mm I.D. Quartz Injector 0.15 mm I.D. Sampling Tubing, 1 m (N8122384) 0.25 mm I.D. Sampling Tubing, 1 m (N8122383) 0.5 mm I.D. Sampling Tubing, 1 m (N8122382)