95% Dimethyl- 5% diphenylpolysiloxane, bonded and crosslinked phase.
he TRB-5MS Column uses the same stationary phase as TRB-5, but the polymer synthesis process, the capillary deactivation technique and the bonding and crosslinking procedures have been optimized to obtain the minimum possible bleeding level and an exceptional chemical inertness
The bleeding specifi cations for a column of 30m x 0,25 mm x 0,25 µm (P/N 520232) inidcate that it is lower than 4 pA at 320ºC
Column recommended to work with any selective detector
Ideal column to connect with a mass detector. Its ultra low bleeding joined to its high chemical inertness allows for a better signal/noise ratio (higher sensitivity level), and therefore better detection and quantifi cation of sample components at low concentrations.
Equivalent phases are: Restek: Rtx-5ms, Rxi-5ms Aglilent/JW: HP-5MS, CP-Sil8-MS, DB-5MS UI, Ultra-2 Supelco: PTE-5, Equity-5 Macherey-Nagel: OPTIMA-5ms Phenomenex: ZB-5MS
Brand | Teknokroma Analitica SA |
---|---|
Column description | TRB |
Package specification | 95% Dimethyl, 5% Diphenylpolysiloxane |
Film thickness | 0.33 μm |
Inner diameter | 0.2 mm |
Max operating temperature | up to 325/350°C |
Length | 20 m |