DIN ISO 9001:2015 certified
costs from €250
Products
Tins
Crucibles as fireproof vasculars for melting of various substances, as well as tins for save containing of chemicals are essential part of every laboratory equipment. There are different materials available for crucibles, e.g. nickel, poreclain or stell of Haldenwanger and Bochem, as well as for tins, e.g. PP, PFA, PC or glass of Nalgene Thermo Scientific, Duran or Bürkle.
At Analytics- Shop, you will find tins in various container sizes, diameters, and closure sizes. Use the navigation on the left to filter by the desired dimensions.
For more information about crucibles and tins please click here.
Haldenwanger
Haldenwanger porcelain crucibles are manufactured out of labour porcelain and Alsint 99,7. The corresponding properties and all products available are listed below. Caused by high fire retardance of Alsint 99,7 (melting point > 2000 °C) and extraordinary chemical resistance crucibles and other devices made out of Alsint 99,7 are finding various use. There are three different forms of cruciles obtainable, cylindrical crucibles with flat bottom (typ 1), conical crucibles with wide form (typ 2) and conical crucibles with a tall form (typ 3).
All melting crucibles of Haldenwanger are glazed on the inside, as well as on the outside. Three different form of melting crucibles are differed, flat form (typ 1, 79), tall form (typ 2, 79 C) and medium tall (typ 3, 79 MF).
Bochem - Crucibles out of Nickel und 18/10 Steel
The crucibles available of Bochem are manufactured from high purity nickel and 18/10 steel. Four typs of crucibles are differed, depending on the wall thickness: 0,5 mm (typ 1), 1,0 mm (typ 2), 1,5 mm (typ 3) und 2,0 mm (typ 4). Closures for the crucibles are not part of delivery and have to be ordered separatly. If you need any closures for your crucibles, you can find all information in the category caps and seals.
Crucibles out of nickel 99,5 %
| Height [mm] | Diameter [mm] | Volume [ml] | Type | Height [mm] | Diameter [mm] | Volume [ml] | Type | |
|---|---|---|---|---|---|---|---|---|
| 20 | 20 | 5 | 1 | 35 | 35 | 25 | 2 | |
| 25 | 25 | 10 | 1 | 40 | 40 | 30 | 2 | |
| 30 | 30 | 15 | 1 | 45 | 45 | 50 | 2 | |
| 35 | 35 | 25 | 1 | 50 | 50 | 70 | 2 | |
| 40 | 40 | 30 | 1 | 60 | 60 | 130 | 2 | |
| 45 | 45 | 50 | 1 | 80 | 80 | 270 | 2 | |
| 50 | 50 | 70 | 1 | 45 | 45 | 50 | 3 | |
| 60 | 60 | 130 | 1 | 40 | 40 | 30 | 4 | |
| 80 | 80 | 270 | 1 | 50 | 50 | 70 | 4 | |
| 30 | 30 | 15 | 2 | 60 | 60 | 130 | 4 |
Crucibles out of 18/10 steel
| Height [mm] | Diameter [mm] | Volume [ml] | Type |
|---|---|---|---|
| 35 | 35 | 25 | 2 |
| 35 | 40 | 30 | 2 |
| 45 | 50 | 70 | 2 |
Tins - Nalgene Thermo Scientific
Thermo Scientific Nalgene PC tins(Polycarbonate) are straight-sided with a large opening. This material offers high impact resistance and is especially suited for storing samples in cooling rooms or freezers.
PMP tins (Polymethylpentene) of Thermo Scientific Nalgene also have a straight side. Furthermore these tins are delivered with a screw closure out of PP (Polypropylene). The advantages of PMP versus glass are reduced weigth on the one side and breaking protection as well as protection of contamination on the other side.
PP tins of Thermo Scientific Nalgene are characterized by a straight side, large opening and a screw closure. The advantages of this material are the same as the ones already discribed for PMP tins. Additionally the sizes 125 and 250 ml fit to Osterizer mixer and other mixers with Mason thread.
Tins - Duran
The special composition of the glass used by Duran, which is also used for tins of Duran, enables the unique chemical resistance, minimum termperature expansion as well as high thermal shock resistance. Additionally a consistent distribution of the wall thickness minimizes the tension of the glass and avoids potential breaking while heating or cooling.
Tins - Bürkle
Thick walled tins of Bürkle obtainable are delivered without a srew cap and are especially suited for sampling and transport. Thereby the user can choose between highly transparent PP for powders and liquids or autoclavable PFA for extremly pure sample taking. Attention should be paid to that PFA is not suited for food industry.
Tins - Kautex
HD-PE (High Density Polyethylen) tins of Kautex are especially suited for storage containers for solid and liquid samples. These screw cap tins are mainly characterized by high chemical resistance versus many organic solvents. Additionally the increased density of PE ensures excellent tear strength.