Internal Reducer 1/32'' to 360 µm, 0.38 mm bore, SS/gold plated Nickel, for FS Tubing

Internal Reducer 1/32'' to 360 µm, 0.38 mm bore, SS/gold plated Nickel, for FS Tubing

Item number: VC-C360IZR.5TS6FS
Brand: Vici Valco
PAK (1 pc)

Description

Valco's internal reducer (IZR) allows smaller tubing to be used in valves with fitting details for larger tubing, forming a positive leak-free seal with zero dead volume. The small line from your system goes directly into the IZR and the sample goes directly into the valve, without the short pieces of connecting tubing required if a reducing union was used instead. Once the fitting is installed, only one wrench is required to remove and reinstall it.
A second version has a 2 micron stainless steel frit pressed into the end of the liner, adding filtering capability. However, we suggest using these only as a final or backup filter, with a standard Valco filter as the primary filter. Because IZRs have a much smaller surface area than the standard filter, they tend to plug too often if used in a stand-alone capacity.
The most recent addition is an IZR for direct connection of 360 µm tubing to a 1/32" Valco valve or fitting detail. It is available in two versions - one with a stainless nut and ferrule and one with PEEK. Both have a stainless steel body.

More Information

  • Additional
Brand Vici Valco
Inner diameter 0.0313 in
Material Stainless Steel
Outer diameter 360 µm

You might also be interested in the following products

  1. Product Image of Easy-Flange, kit in plastic case
    Easy-Flange, kit in plastic case
    Item number: JR-201540
    Brand: Vici Jour

    In stock | 3 Units

    €270.00